Advancements in railway technology are increasing reliability and enabling
more punctual operation of trains with less room for failure. At Innotrans
2018, igus showcased its smart plastics to demonstrate how predictive maintenance
enabled by intelligent cables and energy chains can help trains, trams and
high-speed suburban rail vehicles operate more punctually.
Thousands of commuters depend on a punctual rail service. Defective
trains, therefore, are often a hindrance leading
to unhappy customers and
“Digitisation can change this,” says Thorsten Mersch, Industry
Manager Railway Technology at igus. Playing a major role in the digital
transformation occurring in rail transportation, igus has developed intelligent
cables and energy chains under the name of ‘smart plastics’, which are
monitored in real time and come with a predictable service life.
Trains can be monitored in real
Trains, trams and high-speed suburban vehicles are subjected to
continuous wear and tear. For instance, the door in each of these vehicles is opened
and closed hundreds of times every day. In the event a safe edge, which offers
protection against people getting injured by closing doors, becomes defective,
the door in question is usually immediately disabled. However, this causes longer
boarding and alighting times throwing the timetable into disarray.
Transportation companies can resolve this issue by equipping the safe
edges with CF.Q modules from the igus isense range available from Treotham. The
modules monitor the condition of the cables and send the status data to the
control centre of the operating company by means of the igus mobile
Communication Module (icom). In the control centre, employees use dashboards to
monitor the condition of the safe edges in all trains. The system manages all
limits and provides an alert about the imminent failure of a safe edge. Thanks
to this advance information, operators can plan preventive replacement
centrally and carry it out during scheduled stops.
The principle of predictive maintenance also applies to other components
such as energy chains and linear units that are used as part of a train’s
interior equipment. Railway technology companies using smart plastics have a
precise basis to plan their maintenance and servicing. Parts are only repaired
or replaced when really necessary – and this happens well ahead of the
occurrence of any failure or delay.
A reliable planning basis for
“The expectations of train manufacturers and operators when it
comes to digitisation are just as high as those of industry,” says
At Innotrans 2018, Siemens Mobility presented, among other things, the
new possibilities of high-performance plastics from igus, which enable
intelligent monitoring, analysis and prediction of failures. The planned
collaboration is based on the Siemens ‘Railigent’ application suite, which
offers a wide range of digital services in the area of predictive maintenance,
For more information, please visit the Treotham Automation website or call 1300 65 75 64.