A Full Range of Rack and Gears supplied by T.E.A. Transmissions

The Gears and Racks offered by T.E.A. Transmissions have been designed and manufactured to offer a level of quality that other industrial equipment and bearings can’t match.

Category: Tag:

Description

T.E.A. Transmissions is your one stop supplier for all types of gears, pinions, racks, spindle and spline. The range is available in many sizes and stock is ready for delivery.

  • Modules 1 to 8     
  • Steel / Stainless Steel / Plastic     
  • Precision and Low Cost models     
  • Racks to suit    
  • Worm Gear Sets  
  • Bevel Gears   
  • Helical Rack and Gears

Four great ranges of spur gears to select from:
T.E.A. Spur Gears

  • Low Cost for applications where price is the main consideration
  • Material: C1045 – heat treatable for higher performance
  • Modules: 1 – 8  (larger sizes are available on request)
  • Most sizes in stock


SNB Spur Gears

  • For applications where precision is more important
  • Material: ETG100 (special high strength steel) for smaller tooth numbers and smaller modules sizes and  CK45 steel for all other sizes
  • Modules: 1 to 8 (larger sizes are available on request)
  • Many sizes in stock


SNE Stainless Steel Spur Gears

  • Material: 303 stainless steel
  • Modules 1 – 4
  • Short delivery time

SH Spur Gears with minimal noise

  • Material: Hostaform C – plastic
  • Modules: 0.5 to 3
  • No lubrication needed
  • Quiet running
  • Inexpensive
  • Most sizes in stock

Custom gears are available according to your drawings in steel or stainless steel with small quantities being ok.

Brass and steel spur gears available on request:

  • Brass modules 0.3 – 1 – grade 8d (DIN 58405) – straight tooth
  • Steel module 0.5, 0.7 – milled straight teeth
  • Delrin modules 0.5 – 3 – ideal for temperatures up to 100ºC and
  • intermittent up to 160ºC
  • Steel hardened, ground, crowned – modules 1 – 8

T.E.A. Transmissions also supplies a large range of specialty and standard engineering and transmissions components from stock drive parts including steel/plastic Spur Gears Modules 0.5-8, steel/plastic Bevel Gear Sets, Universal Joints, Rod Ends, Trapezoidal Spindle, Spline Shafts and Precision Round Shafts. As well as custom Linear Motion Systems, Linear Actuators, Screw Jacks and Ball Screws.